Filter By Manufacturer:

#ABCDEFGHIJKLMNOPQRSTUVWXYZ

DATATAKER Parts List

Back to: Home > D > DATATAKER
905U-D Radio Modem - The 905U-D radio modem module provides RS232 or RS485 connections by radio. It is a low cost wireless alternative for linking data loggers and supervisory computers. The 905U-D has been designed to be easy to use and simple to install. It uses a part of the radio spectrum which does not require a radio license in most countries. The module is fully integrated with radio, power supply, serial ports and microprocessor controller housed in a strong industrial aluminium case
CANgate - The dataTaker CANgate is a CAN to ASCII gateway converting CAN (Controlled Area Network) and GPS data to serial data. It has been designed to capture the real-time data available on CAN and GPS networks (e.g. temperatures, RPM, brake/throttle settings, latitude, longitude, speed etc.) and pass that information on to either a dataTaker data logger or host computer system.
CEM - The Module provides channel expansion (10 - 30 channels, depending your sensor type) with relay multiplexer for up to 100V inputs. The Module is suitable for the DT500 / DT505 / DT515 / DT600 / DT605 / DT615 dataTaker's.
DeLoad - Allows you to send programs to a dataTaker with the click of a button. Programs can be sent to memory cards and internal Flash. Automatically connects to dataTakers via RS232, Modem or Ethernet. Unloads data to disk or network location. Sends data via Email or to an FTP server.
DeLogger 4 - Easy to use dataTaker Setup and Display Software This powerful graphical programming and data presentation software is suitable for the DT50 / DT500 / DT600 / DT800 Series of dataTakers. Features include easy setup, data unloads and data viewing via plots, spreadsheet and mimic screens.
DeLogger4 Pro - SCADA and Presentation Capability DeLogger Pro 4 is similar to the DeLogger 4 but also controls remote dataTakers and has more extensive data presentation capability including enhanced spreadsheets, plots and mimics. Web publishing, email of alarms and many automation features.
DeMobile5 - DeMobile5 software for use with the new Personal Digital Assistants (PDA) using Microsoft's(R) Pocket PC2003 operating system. Whether used on its own or in conjunction with Datataker's DeLogger(TM) 4 Pro software, it provides a powerful tool to program, monitor and unload data from your DT5/6xx Range data logger.
DeMobile8 - DeMobile8 software for use with the new Personal Digital Assistants (PDA) using Microsoft's(R) Pocket PC2003 operating system. Whether used on its own or in conjunction with Datataker's DeLogger(TM) 4 Pro software, it provides a powerful tool to program, monitor and unload data from your DT800 data logger.
DeTransfer - Text Based Programming This software is a smart terminal program that provides separate send and receive windows, macro buttons and data unload capabilities. It is compatible with the DT50 / DT500 / DT600 / DT800 Series of dataTakers.
DT1000 - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life. Two channels temperature logger (100kO thermistor)
DT1700 - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life. Temperature Loggers - Thermocouple: 1, 2 or 4 Channels
DT1700-20N - DT1700 Temperature Data Loggers. For use with J, K, T, E, R and S thermocouples. Thermocouple - Narrow Range (–200°C to +240°C with ±0.35°C @ 25°C accuracy). Two channels - one thermocouple input plus ambient temperature.
DT1700-20W - DT1700 Temperature Data Loggers. For use with J, K, T, E, R and S thermocouples. Thermocouple - Wide Range(–100°C to +1370°C with ±1.3°C accuracy @ 25°C). Two channels - one thermocouple input plus ambient temperature.
DT1700-30N - DT1700 Temperature Data Loggers. For use with J, K, T, E, R and S thermocouples. Thermocouple - Narrow Range (–200°C to +240°C with ±0.35°C @ 25°C accuracy). Three channels - two thermocouple input plus ambient temperature.
DT1700-30W - DT1700 Temperature Data Loggers. For use with J, K, T, E, R and S thermocouples. Thermocouple - Wide Range(–100°C to +1370°C with ±1.3°C accuracy @ 25°C). Three channels - two thermocouple input plus ambient temperature.
DT1700-50N - DT1700 Temperature Data Loggers. For use with J, K, T, E, R and S thermocouples. Thermocouple - Narrow Range (–200°C to +240°C with ±0.35°C @ 25°C accuracy). Five channels - four thermocouple input plus ambient temperature.
DT1700-50W - DT1700 Temperature Data Loggers. For use with J, K, T, E, R and S thermocouples. Thermocouple - Wide Range(–100°C to +1370°C with ±1.3°C accuracy @ 25°C). Five channels - four thermocouple input plus ambient temperature.
DT2000 - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life. Temperature and humidity logger (2% RH Accuracy).
DT4000 - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life.
DT4000-101 - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life. One switchable 0–1V or 0–10V
DT4000-1CW - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life. One 4–20mA with XPS.
DT4000-411 - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life. Four: two 0–10V and two switchable 0–1V or 0–10V.
DT4000-4CW - This series of Compact Precision 1 - 5 channel loggers are specifically designed for measuring temperature, humidity, voltage and 4-20mA sensors. These units are simple to set up, stores 70,000 readings and has a 10-year battery life. Four 4–20mA with XPS switch on two channels.
DT50 - Cost Effective General Purpose. This 5 channel unit (5 to 10 sensors, depending on sensor type) supports thermocouples, RTD, strain gauges and bridges. With 5 digital I/O and counters, RS232 communications and SRAM PC Cards for data storage.
DT500 - General Purpose with optional Expandability. This 10 channel (10 - 30 sensors depending on sensor type) data logger has a solid state multiplexer and supports RTD, thermocouples, strain gauges, bridges and others. With 4 digital I/O and counters, SRAM PC Cards for data storage and RS232 communications.
DT505 - This 10 channel (10 - 30 sensors depending on sensor type) data logger has a robust relay multiplexer for up to 100V inputs, supports thermocouples, RTD, strain gauges, bridges and others. With 4 digital I/O and counters, RS232 communications and SRAM PC Cards for data storage.
DT51 - General Purpose Economical Unit. The new dataTaker DT51 is a general purpose economical logger suitable for end user or OEM use. The DT51 features 1 to 3 analog channels depending on sensor type, four digital input channels, 3 high speed counters and sampling speed of 25 - 70 samples per second.
DT515 - GeoLoggers - for Geotechnical Applications. Supporting Vibrating Wire Sensors, this 10 channel logger (10 to 30 sensors depending on sensor type) has a relay multiplexer for up to 100V inputs, supports thermocouples, RTD, strain gauges, bridges and others. With 4 digital I/O and counters, RS232 communications and SRAM PC Cards for data storage.
DT53 - General Purpose Digital Unit. The dataTaker DT53 is a general purpose logger suitable for end user or OEM use. The DT53 features 4 digital channels for event, state, counting and outputs, plus 3 high speed counters inputs for rates up to 1kHz. Data logging speed is up to 100 samples per second.
DT600 - General Purpose with optional Expandability. This 10 channel (10 - 30 sensors depending on sensor type) data logger has a solid state multiplexer and supports RTD, thermocouples, strain gauges, bridges and others. With 4 digital I/O and counters, SRAM PC Cards for data storage and RS232 communications. The DT600 has a keypad and a display for control of the data logger and data viewing.
DT605 - This 10 channel (10 - 30 sensors depending on sensor type) data logger has a robust relay multiplexer for up to 100V inputs, supports thermocouples, RTD, strain gauges, bridges and others. With 4 digital I/O and counters, RS232 communications and SRAM PC Cards for data storage. The DT605 has a key pad and display for control of the data logger and data viewing.
DT615 - GeoLoggers - for Geotechnical Applications. Supporting Vibrating Wire Sensors, this 10 channel logger (10 to 30 sensors depending on sensor type) has a relay multiplexer for up to 100V inputs, supports thermocouples, RTD, strain gauges, bridges and others. With 4 digital I/O and counters, RS232 communications and SRAM PC Cards for data storage. The DT615 is similar to the DT515 with the addition of a key pad and 2 line x 16 character display for control of the data logger and data viewing.
DT80 - Experience the dataTaker DT80. A robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display.
DT800 - The first of the next generation of faster, smarter and versatile units. Ethernet, RS232 and modem communications, the DT800 has 12 universal channels that provide direct connection of 12 to 42 sensors supporting thermocouples, RTD, strain gauges, bridges and more. With 16 digital I/O and counters, FLASH and disc PC Cards for data storage.
DT81 - The DT81 is a robust, stand alone, low power and economical data logger. It’s USB memory stick support, 18 bit resolution and extensive communications capabilities make it a powerful partner.
DT85 - The dataTaker DT85 extends the DT80 data logger range to applications requiring more sensors or complex wiring combinations. The dataTaker DT85 Dual Channel concept allows up to 32 isolated or 48 common referenced analog inputs to be used in many combinations.
LabVIEW Driver - dataTaker instrument driver for LabVIEW Combine these with National Instruments LabVIEW’s powerful graphical programming and BANG……. Powerful Solutions for every data acquisition application.
Radio Modem - 905U-D for dataTaker Data Loggers. The 905U-D radio modem module provides RS232 or RS485 connections by radio. It is a low cost wireless alternative for linking data loggers and supervisory computers.
SMSX CDMA Modem - Advanced modem extends normal dial-up capabilities into full SMS communications and control of your data logger using only a mobile phone. Connects to the CDMA network
SMSX GSM Modem - Advanced modem extends normal dial-up capabilities into full SMS communications and control of your data logger using only a mobile phone. Connects to the GSM network
SMSX Modem - Using either of these advanced modems extends normal dial-up capabilities into full SMS communications and control of your data logger using only a mobile phone.
Vox Technologies © 2007 | Site Map | Delivery Policy | Privacy Policy | Refund Policy | Secure Transaction Policy | Last Modified 4/21/2008