Filter By Manufacturer:

#ABCDEFGHIJKLMNOPQRSTUVWXYZ

VECTOR ELECTRONICS & TECHNOLOGY Parts List

Back to: Home > V > VECTOR ELECTRONICS & TECHNOLOGY
01/1 - BIT- REPLACEMENT OBSOLETE,M6167D5.21
02/1 - BIT- REPLACEMENT PKG 1, M6167D5.21
04/1 - WIRE WRAP BIT #30
106P106-1 - Board, Circuit; FR4 Epoxy Glass; 10.6 in. H x 10.6 in. W; 0.042; 0.100 x 0.100
106P180-4 - Board, Circuit; FR4 Epoxy Glass; 10.6 in. H x 18.0 in. W; 0.042; 0.100 x 0.100
106P70-4 - Board, Circuit; FR4 Epoxy Glass; 7.0 in. H x 10.6 in. W; 0.042; 0.100 x 0.100
1100136-15A - BACKPLANE, 21SLOT, ABG CONN, CAPS
1111-88 - ROLL PIN (HA9, SPEC4131)
126M76-032 - PCB, Prototyping board
12X12C1 - PCB, Prototyping board
12X12C2 - PCB, Prototyping board
12X12WE - PCB, Prototyping board
12X12WEC1 - V Board, FR-4, copper, 12 in x 12 in, no holes
1400-0188-01 - BRACKET- CARD RETAINER
1401-0013-01 - SIDEWALL RIGHT/LEFT 3U WITH RR I/O ALUM
1404-0012-84 - Subrack, Din-Based
1404-0016-63 - NUT STRIP 12.80in LG RTL WITH .200 BORDER
1404-0016-84 - Nut Strip for Front EMC Extrusion, M2.5, 84HP, 17 inch
1404-0016-98 - NUTSTRIP, RITTAL 3684610, 17in
1406-1006-01 - MOUNTING FLANGE, 6U, RITTAL 3684617.
1440-0013-42 - EXTR REAR: 8.60 INCH (42HP) VET NO LIP .1 BD
1440-0013-63 - EXTR REAR: 12.80 INCH (63HP) VECTOR NO LIP
1440-0013-84 - Rear Horizontal Extrusion, 84 HP, 17 inch
1440-0014-84 - EXTR FRONT: 17.0 INCH (84HP) VECTOR W/LIP
1441-0012-42 - EXTRUSION,FRONT EMC RAIL, 42 HP
1441-0012-63 - EXTRUSION,FRONT EMC RAIL, 63 HP
1441-0012-84 - EXTRUSION: FRONT EMC RAIL ( 84 HP )
1441-0013-84 - EXTRUSION: CENTER EMC RAIL ( 84 HP )
1450-0001-01 - PCB ESD CONTACT
150P09 - V BOARD,EPOXY COMP LAM, 1.5 INCH X 0.9 INCH
155H175WE - Punchboard; FR4 Epoxy Glass; 16.0 in. W x 18.0 in. L; 0.062; 0.062; FR4
169044C2 - V BOARD,EPOXY COMP,NO HOLES,4.5 INCH X 17.0 INCH
169P44 - Punchboard; CEM-1 Epoxy Glass Composite; 4.5 in. W x 17.0 in. L; 0.062; 0.062
169P44C1 - Punchboard, Copper Clad; CEM-1 with One Side 2 oz. Copper Clad; 0.042; CEM-1
169P44C2 - PC BOARD CEM-1 COPP-2SIDE 4.5X17
169P44WE - Punchboard, Unclad; FR4 Epoxy Glass; 4.5 in. W x 17 in. L; 0.062; 0.042; FR4
169P44WEC1 - Punchboard, Copper Clad; FR4 with One Side 2 oz. Copper Clad; 0.042; 0.062 in.
169P44WEC2 - V Board
169P44XXXP - Punchboard; FR2 Phenolic; 4.5 in. W x 17.0 in. L; 0.062; 0.042; FR2
169P59-032 - Punchboard, Unclad; Epoxy Glass; 6 in. H x 17 in. L; 0.032; 0.042; FR4
169P59-047 - Punchboard, 17.0 Inch x 6.0 Inch, Fr4 Epoxy Glass
169P59C1 - VECTORBORD,EP GLASS COMP,CU-1,6.0 INCH X 17 INCH
169P59XXXP - Punchboard; FR2 Phenolic; 6.0 in. W x 17.0 in. L; 0.062 in.; 0.042 in.; FR2; ;
169P79 - Punchboard; CEM-1 Epoxy Glass Composite; 8.0 in. W x 17.0 in. L; 0.062; 0.042
169P79WE - PCB, Prototyping board
169P84 - Punchboard; CEM-1 Epoxy Glass Composite; 8.5 in. W x 17.0 in. L; 0.062; 0.042
169P84C1 - Punchboard, Copper Clad; CEM-1 with One Side 2 oz. Copper Clad; 0.042; CEM-1
169P84HT - Vectorboard, P, 17.0 X 8.5 Inch, P96 HI-Temp
169P84HTC2 - Vectorboard, P, 17.0 X 8.5 Inch, P96, COPP 2-Sides
169P84WE - Punchboard; FR4 Epoxy Glass; 8.5 in. W x 17.0 in. L; 0.062; 0.042; FR4; UL94V-0
169P84WEC1 - Punchboard, Copper Clad; FR4 with One Side 2 oz. Copper Clad; 0.042; 0.062 in.
169P99 - Vectorbord; CEM-1 Epoxy Glass Composite; 10.0 in. W x 17.0 in. L; 0.062; 0.042
169P99WE - PCB, Prototyping board
170H48-032 - SEE 170H48WE-032
170H48WE - Punchboard; FR4 Epoxy Glass; 4.8 in. W x 17.0 in. L; 0.062; 0.062; FR4; UL94V-0
170H48WE-032 - Prototyping PC Board
170H85WE - Punchboard; FR4 Epoxy Glass; 8.5 in. W x 17.0 in. L; 0.062 in.; 0.062 in.; FR4
2250175 - ENCLOSURES
2345-0019B - THIS IS A CUSTOM CHASSIS.
2345-316-08-31-00-00 - System enclosure for 3U cPCI cards
2375-616-051-00-02 - 3U VMEJ2 SYSTEM ENCLOSURE
2600-075 - PWR SUPPLY 75W CPCI CLOSED FRM
2600-150 - PWR SUPPLY 150W CPCI CLSD FRM
2600-300 - POWER SUPPLY 300W CPCI 4 OUTPUT
2600-350 - 350W AC POWER SUPPLY
2650-075 - PWR SUPPLY 75W CPCI CLOSED FRM
2650-150 - PWR SUPPLY 150W CPCI CLSD FRM
2650-300 - CABINETS
2650-350 - PWR SUPPLY 350W CPCI CLSD FRM
2700-200 - PWR SUPPLY 200W CPCI CLSD FRM
2750-200 - PWR SUPPLY 200W CPCI CLSD FRM
3020 - FR-2 PHENOLIC, 36" X 48"
3200152-3V - EXTENDERR,PCI,3.3VOLTS ,FAB
3200152-5V - EXTENDER,PCI,5 VOLT, FAB
3250-0001-01 - CARD GUIDE, EMC, INJECT/EJ, 1101.10, 160MM
3250-0012-01 - CARD GUIDE,EMC,1101.10,220MM
336M76-032 - Punchboard; FR4 Epoxy Glass; 4.0 in. W x 17.0 in. L; 0.037; 0.025; FR4; UL94V-0
336M76-032C1 - Punchboard, Copper Clad; FR4 Epoxy Glass, Copper Clad 1 Side; 0.025; 0.037 in.
349P84 - PCB, Prototyping board
3662 - Board, Plug; CEM-1; 4.50 in. H x 6.50 in. W; 0.042; 0.100 x 0.100; 0.062 in.
3662-2 - Board, Plug; CEM-1; 4.50 in. H x 6.50 in. W; 0.042; 0.100 x 0.100; 0.062 in.
3662-5 - Plugboard; Epoxy Glass; 4.5 in. H x 4.5 in. W x 0.062 in. T; 0.042 in.; CEM-1
3662-9 - PCB, Prototyping board; Thickness:0.062"; Pitch Spacing:0.156"; PCB Type:Plug Board; Leade
3662-9 PLUGBOARD - Board, Plug; FR4 Epoxy Glass; 4.50 in. H x 6.50 in. W; 0.042; 0.100 x 0.100
3662A6 - PCB, Prototyping board
3677 - Board, Plug; CEM-1; 4.5 in. H x 9.6 in. W; 0.042; 0.100 x 0.100; 0.062 in.
3677-2 - PCB, Prototyping board; Thickness:0.062"; Pitch Spacing:0.156"; PCB Type:Plug Board; Leade
3677-6 - Board, Circuit; CEM-1; 4.5 in. H x 8.08 in. W; 0.042; 0.100 x 0.100; 0.062 in.
3682 - PCB, Prototyping board
3682-2 - PCB, Prototyping board; Thickness:0.062"; Pitch Spacing:0.156"; Pin Capacity:24; PCB Type:
3682-4 - PCB, Prototyping board; Thickness:0.062"; Pitch Spacing:0.156"; Pin Capacity:24; PCB Type:
3690 - Test Extender; R644; FR4 Epoxy Glass, 2 oz. Copper; Ni/Gold Plated; 6.5 in.; ;
3690-1 - EXTENDER CARD,3690 WITH NO CONNECTOR,AVX
3690-12 - Extender, PCMCIA Flexible, 12 in
3690-16 - Test Extender; R656; FR4 Epoxy Glass, 2 oz. Copper; Ni/Gold Plated; 6.5 in.; ;
3690-18 - Extender, Bus; Gold-plated.; FR4 Epoxy Glass; Copper; 300 VDC/200 V (RMS); ; ;
3690-2 - Test Extender; R636; FR4 Epoxy Glass, 2 oz. Copper; Ni/Gold Plated; 11 in.;
3690-22 - Extender Card; FR4 Epoxy Glass; 5.7 in.; 300 VDC/200; 5 A @ 10 degF (Rise)
3690-26 - Extender; FR4 Epoxy Glass; 5.6 in.; Nickel/Gold; 200 RMS or 300 VDC
3690-26-1 - PCB, Prototyping board; Pitch Spacing:0.100"; PCB Type:Extender Cards; Leaded Process Compatibl
Vox Technologies © 2007 | Site Map | Delivery Policy | Privacy Policy | Refund Policy | Secure Transaction Policy | Last Modified 4/21/2008